Bobcat Service Analyzer V87.07 + KG

Bobcat Service Analyzer V87.07 Programming & Diagnostics Tool 05/2019 + KG

KG -PC unlock

Information and diagnostic tools Bobcat helps you find out whether there is a problem with our equipment to avoid potential danger. This software will allow you to familiarize yourself with the various technical information and functions of this program, with which you can correctly diagnose your equipment and prevent premature breakdowns.

Service analyzer V87.07 Bobcat is intended for diagnostic, service log, and calibration equipment and can to do next action:
- Software updates
- Change SN/Options
- Clear Controller Data
- Drive pump calibration status
- Panel
- Remote Control
- System
- Vitals
- Edit diagnostic screens
- Interactive tests and etc.
The service analyzer includes step by step instructions for repair and maintenance of Bobcat equipment. With help instructions, you can do diagnostic your equipment.

Service Analyzer V87.07 - 22 May 2019

1. New TLS Gateway Software (V6.40), TLS Drive
Software (V6.40) and TLS Workgroup Software
(V6.40) to support new controllers with part
numbers 7273600, 7273601, and 7273602.

2. New Manbasket Software (V1.40) and GACD2
Software (V1.20) to support new controller
with part number 7273603.

3. Support added for the following machines:
- D35*J**R: B4WV11001+
- D35ZK*ER: B4CS11001+
- D42*J**M: B4WW11001+
- D42*J**R: B4YF11001+
- D50*J**M: B4WY11001+
- D50*J**R: B4YG11001+

4. Support added for 7" Display on the
following machines:
- E85*J**R: B48413701+

Service Software V86.11 - 20 June 2018
1. Telehandler Software Update (Workgroup V5.6; Drive V6.1; and Gateway V5.2):
a. Creation of following serial numbers for 4.3 T machines:
- B4BT11001+
- B4BU11001+
- B4BV11001+
- B4BW11001+
- B4BY11001+
- B4BZ11001+
- B4P711001+
- B4C111001+
- B4C211001+
- B4P811001+
b. Activated automatic suspension function on following serial numbers

PF1:
B3G415001+, B3G615001+, B3G715001+
B3G815001+, B3G915001+, B3GA15001+
B3GB15001+, B3GC15001+, B3GD15001+
B3GE15001+, B3GF15001+, B3GG15001+
B3Z815001+, B3ZH15001+, B3YD15001+
B3YF15001+, B3ZL15001+, B3ZM15001+
B4AY15001+, B4AZ15001+, B4B215001+,
B4B315001+, B4DW15001+, B4DZ15001+

PF2:
B41N17001+, B41P17001+, B41R17001+,
B41S17001+, ANL716001+, ANMG16001+,
AVM116001+, AVM616001+, AR3916001+,
AR3D16001+, B3C416001+, B3C516001+,
B3ZS17001+, B3ZT17001+, B3ZZ17001+,
B41117001+, B4C317001+, AVDV16001+,
AHT416001+, AVKJ16001+, AVKM16001+,
AVDZ16001+, AT7A16001+, B3C616001+,
B3C716001+, B3ZU17001+, B3ZV17001+,
B41217001+, B41317001+, B4BT11001+,
B4BU11001+, B4BV11001+, B4BW11001+,
B4BY11001+, B4BZ11001+, B4P711001+,
B4C111001+, B4C211001+, B4P811001+
c. Improved interrupt power monitoring on Workgroup and Auxiliary controllers: reduces occurences of H3596 and W3296.
d. Improved management of H4622 when battery voltage is low: reduces occurences.

Bobcat Service Analyzer V86.02 is diagnostic software, which contents complete information for diagnostics and calibration Bobcat equipment. The setting diagnostic software Bobcat Service Analyzer V86.02 on a personal computer, the user has everyday access view a necessary information for the diagnostic engine. This software will allow you to familiarize yourself with the various technical information and functions of Bobcat equipment. So with service analyzer, you can correctly diagnose your equipment and prevent premature breakdowns.

The Bobcat Service Analyzer will allow you to perform the following functions:
1. Programming:
- Software updates
- Change SN/Options
- Clear Controller Data
2. Service Log:
- Service codes
- Warnings & Shutdowns
- Maintenance clock
- Raw data (hex) View
3. Diagnostics:
- Drive pump calibration status
- Panel
- Remote Control
- System
- Vitals
- Edit Diagnostic Screens
4. Calibrations:
- Actuator
- Wheel angle
- Remote control sync
- Keyless panel downgrade
- interactive tests
All these functions are active, and you can use them to diagnose your hardware model, just enter your data and use professional and correct information

On our site, you can order a diagnostic program. Once you get the software, we will send all the instructions necessary to install and provide after-sales service or the product can be activated using Teamviewer Remote Assistance.

Service Software V86.02 - 21 Feb 2018:
1. Removed Auto-Idle as an option for SJC loaders with Bobcat Engines. Before this was a selectable option. The feature is defaulted to on for these machines.
2. Loader software update for Bobcat Engine machines.
Adds two new codes (M0144 and M0145). Related to air filter plugging for loaders with M4 Gateway Controller and Bobcat Engines. Codes are set and engine power is de-rated after operating 8 hours with a plugged air filter code (M0117).
3. New telehandler Drive software (V5.9):
- Transmission softening for following machines (all platforms):
TL30.60, TL26.60, V519, TH.6030, TL30.70, TH.7030, TL38.70HF, TH.7038, TL34.65HF, TH.6534, TL35.70, TH.7035, T35.105, T35.105L, T36.120SL, T35.130S, T35.130SLP, T35.140S, T41.140SLP, T40.180SLP.
- Reduction of engine speed to apply park brake later when the engine shut down occurs on following machines (all platforms Stage 4):
TL30.60, TL26.60, TH.6030, TL30.70,TH.7030, TL34.65HF, TH.6534, TL35.70, TH.7035, TL38.70HF, TH.7038, T35.105, T35.105L, T36.120SL, T35.130S, T35.130SLP, T35.140S, T41.140SLP, T40.180SLP
4. New telehandler Gateway software (V5.9):
- Current ECU and DCU software version displayed on Service Analyzer for Stage 4 machines.